When you need to replace your watch’s back, there are a few different methods. These include using a watch press, knife, or case back wrench. Regardless of the method you use, be sure to read the instructions carefully. There are also different types of watch cases: screw-on and snap-off. To remove the screw-on back, you need to first open the cover.
Using a case back wrench
A case back wrench is a tool that allows you to remove a watch back. It’s important to use the right kind of wrench for the job. You want one that has the right thickness and width. If you choose a thin one, it will make it difficult to get a grip. You can also choose one with a slotted design.
You can also use a case opener or knife to unsnap the watch back. If it doesn’t come off easily, you may need to force it. This can damage the backing piece. If this happens, you should replace the backing piece. You can also try to use your hands to partially screw the back on and then use the wrench to tighten it.
A good case back wrench will have two or three prongs. A three prong wrench will have three contact points with the watch, which will help you remove the cover with less effort. You’ll be able to tell if you need a three-prong wrench by looking at the slots and grooves on the back of the watch. You’ll want to align the bottom pin with the opposite notch.
The most common case back wrench is the economy case wrench, which has been manufactured in India for about 40 years. It’s a cheap tool that beginners can use on old beat-up watches. It is also a popular choice for battery changers and jewelers. It’s easy to use and can open most cases without damaging the case back, but it’s not recommended for brand new watches.
A case back opener can also be used to pry off the case back of a watch. The tool comes with a handle and special dies designed for each brand of watch. After placing the die on the case back, you can start unscrewing until the case back is loose.
Using a knife
First, you need to take off the band on your watch. This will help you get to the case, which has a notch in the back. Using a knife, insert the blade into the tab, and turn the watch to get access to the case. You can also use a case opener. It’s important to get the right tool to open your watch’s back, or it will break.
To open the watch case back, you need a knife, three-prong opener wrench, or two-prong watch back opener wrench. Each tool is different in thickness and size, but they all work by twisting the watch back open. Be careful not to bend the back, as this can damage the watch inside.
A pen knife can be used for this purpose. But you can also use a knife to open the case back, which will unclip the watch case from the back. To avoid damaging your watch case, use a knife made of plastic, as it is safer than metal. To prevent slippage, you can use sticky tape or cloth to cover your hands.
Using a crystal lift
If your watch’s crystal has broken, you can try using a crystal lift. The tool has jaws that are wider than the crystal’s width. To use it, place the tip of the crystal lift on the metal plate that is in the case. Then, hold the crystal with the lift’s jaws closed. The case will slide right over the crystal.
You can also use a crystal lift to remove the watch back. A crystal lift is a very useful tool for replacing a watch crystal. However, make sure you know the exact size of the crystal so that you don’t damage the rest of the watch. Then, you can insert the crystal back into the watch.
The crystal lift works by applying a gentle pressure to the crystal. This is a quick and easy operation. When used correctly, you don’t have to use any special tools. You just need to follow a few simple steps to remove the crystal and watch back from your watch.
Using a crystal lift is one of the most common ways to remove a watch back. This tool has many uses and is relatively inexpensive. You can purchase one online for as little as 15 to 25 dollars depending on the quality. It usually comes with a plastic die set.
If you are unable to remove the watch back, you can use a watch case holder. Ensure that the watch is placed in a soft surface so that it does not scratch the crystal. Then, simply set the watch back on the case holder. Make sure that the watch is in an upright position.
Using a watch press
When you’re trying to get a watch back off, you may want to use a watch press. Watch presses are very easy to use, and they can take just a few seconds. It’s important to be careful not to crack the watch while using a watch press, however.
A watch press is a mechanical device that helps you open and close snap-on watch backs without damaging the watch crystal. It comes with several brass rings that should be positioned so that they touch the watch bezel. Simply place your watch on the brass ring, face down, and use the black rubber pad to push down on the watch until it clicks into place. Some watches have a smaller indentation around the seal, which can make this task easier.
If you’ve never used a watch press before, you might be wondering how to use one. It’s important to have the proper tools and be patient. Without the right tools, the process of opening a watch back can be difficult and can even cause damage. However, there are some basic instructions that you can follow to make this task a lot easier.
A watch press is a small and inexpensive tool that is used to remove the watch back. You can purchase one online for between 15 and 25 dollars. Most watch presses come with plastic die sets for easy removal. You may also need a small screwdriver or blade to loosen screws.
Using a watch press is an effective way to get a watch back off if you can’t reach the screwholes on your watch. Watch backs can also be removed easily by using a knife to remove them. A watch press will allow you to remove the watch back while protecting your watch from damage.
